features rating to 1000v prv ideal for printed circuit board reliable low cost construction utilizing molded plastic technique results in inexpensive product lead tin plated copper mechanical data polarity:symbol molded on body mounting position :any maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% characteristics symbol bt05s bt1s bt2s bt4s bt6s bt8s BT10S unit maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current (note 1) @t a =40 peak forward surge current 8.3ms single half sine-wave super imposed on rated load(jedec method) peak forward voltage at 0.8a dc v f v maximum dc reverse current @t j =25 at rated dc bolcking voltage @t j =125 typical junction capacitance per element (note2) c j pf typical thermal resistance (note3) r jc /w operating temperature range t j storage temperature range t stg rev. 1, 01-jun-2012 notes:1.mounted on p.c. board. 2.measured at1.0mhz and applied reverse voltage of 4.0v dc. 3.thermal resistance junction to case 15 75 -55 to +150 -55 to +150 1.1 i r 5.0 a 500 a i fsm 30 a dimensions in inches and (millimeters) i (av) 0.8 bt05s thru BT10S surface mount glass passivated bridge rectifiers reverse voltage - 50 to 1000 volts forward current - 0.8 ampere bts .008(0.2) .030(0.75) .018(0.45) .106(2.7) .09(2.3) .197(5.0) .181(4.6) .063(1.6) .047(1.2) c0.5 .157(4.0) .142(3.6) .043(1.1) .027(0.7) .276(7.0) .260 ( 6.6 ) .014(.35) .006(.15) .071(1.8) .055(1.4) - + ~ ~
rating and charactertic curves bt05s thru BT10S rev. 1, 01-jun-2012 instantaneous reverse current,(a) percent of rated peak reverse voltage (%) fig.3-typical reverse characteristics 140 0.01 0.1 0 20 40 60 80 100 120 1.0 10 100 t j =125c t j =25c 1 4 10 100 100 10 1.0 reverse voltage volts capacitance( p f) fig.5-typical junction capacitance tj=25c f=1mhz average forward current amperes fig.1-forward current derating curve a mbient temperature, 1.0 0.8 0.6 0.4 0.2 0.1 20 40 60 100 120 140 160 80 mounted on board single phase half wave 60hz resistive or inductive load fig.2 - maximum non-repetitive surge current peak forward surge current, amperes number of cycles at 60hz 1 2 5 10 20 50 100 10 0 40 30 20 pulse width 8.3ms single half-sine-wave (jedec method) 0.01 0.1 1.0 10 instantaneous forward voltage,volts instantaneous forward current,(a) fig.4-typical forward characteristics t j= 25c pulse width:300us 2% duty cycle 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
|